Deep Blue Non-Chlorine Granular Shock – 10kg

Description

Supplied in the 10kg size.

Deep Blue Pro Non-Chlorine Shock brings a powerful, flexible option to pool treatment, reshaping how pool maintenance gets done. It shock doses pools running on any type of chlorine sanitiser without raising chlorine levels, giving pool owners a convenient route to consistently clean water.

This product’s ability to revive spent Bromine in Bromine-treated pools is one of its biggest strengths, giving a rounded solution for sanitation. Its granules dissolve fast, clearing away pollutants and organic matter for a clean, hygienic pool for the whole family.

Deep Blue Pro Non-Chlorine Shock holds up well whatever water conditions or pH levels your pool experiences, delivering steady results each time. That flexibility makes it well suited to pools with automatic covers, adding both convenience and consistency to your maintenance routine.

Clear application instructions help you get the best from this product. Keep pH within the 7.2 to 7.6 range and free chlorine between 1 to 3mg/l for pools and 3 to 5mg/l for spas to make sure it works efficiently and your pool water stays clean and safe.

Dosing rates are set out by water volume, so treatment can be scaled to match your pool. Whether your pool is small or large, Deep Blue Pro Non-Chlorine Shock flexes to fit different requirements.

A few general precautions matter when handling this product, to keep things both safe and effective. Use suitable protective gear, keep it away from other chemicals, and store it in a cool, dry spot to protect its quality. Following this advice helps you make the most of Deep Blue Pro Non-Chlorine Shock without compromising on safety.

When it comes to risk and safety, Deep Blue Pro Non-Chlorine Shock is designed with user protection and product quality in mind. Since it contains Potassium Peroxymonosulphate, keep it away from combustible materials and handle it carefully to prevent burns or accidents.

Always check the label and product details before use to stay safe. Store it out of children’s reach, and should it come into contact with eyes, rinse well straight away and seek medical advice. Good safety habits and careful handling keep your pool maintenance routine smooth and secure with Deep Blue Pro Non-Chlorine Shock.

Notice the difference with Deep Blue Pro Non-Chlorine Shock, a dependable choice for shock dosing pools and keeping water quality on point. This advanced treatment helps keep your pool pristine, welcoming and safe for everything you do in the water.

Manufacturers description:

Deep Blue Pro Non-Chlorine Shock can be used to shock dose pools which use all types of chlorine as a sanitiser without boosting chlorine levels.
It may also be used for reactivating spent Bromine in Bromine treated pools.
It dissolves rapidly to break down unpleasant pollutants and organic matter, and is effective over a wide range of water conditions and pH values.
It is an ideal shock treatment for pools using automatic pool covers.

Application Instructions:1. Maintain pH levels within the ideal range 7.2 – 7.6. If the level is not in this range, adjust.
2. Maintain free chlorine levels in the range pools: 1 – 3mg/l(ppm); spas 3 – 5mg/l(ppm).
3. Pre-dissolve this product in a clean plastic container at a maximum rate of 100g of product to 2.2 gallons (10 litres) of water. Stir well to ensure product is fully dissolved. Add the resulting solution to the pool or spa whilst the pump(s) are turned ‘on’ preferably near the water inlets to aid distribution.
4. After shock treatment procedure, allow at least 30 minutes before bathing recommences.

General PrecautionsDosing:Wear eye and face protection and ensure granules are not blown back into your face.
Never mix with any other chemicals including cleaning products and chlorine products, as a dangerous reaction may occur.
Do not pour this product into a pool skimmer basket containing chlorine tablets or any other product.
When pre-dissolving product always add to water not vice versa.

Handling/StorageImportant – See Risk and Safety phrases below.
Handle products in a well ventilated area, preferable outdoors.
Wash hands after use.
Ensure chemicals do not become damp in storage – store in a cool dry place.
Contains Potassium Peroxymonosulphate
NEVER MIX CHEMICALS. Always add chemicals to water and not water to chemicals.

RISK Contact with combustible material may cause fire.
Causes burns.

SAFETYUse Biocides safely. Always read the label and product information before use.
Keep locked up and out of the reach of children.
In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
Wear Suitable protective clothing, gloves and eye/face protection.
In case of accident or if you feel unwell seek medical advice immediately and show this container or label.
This material and/or its container must be disposed of as hazardous waste.
Refer to special instructions/safety data sheet.