Deep Blue Pool Algae Eliminator – 20L

Description

This listing covers the 20L size.

Persistent pool algae meets its match in Algae Eliminator, a powerful solution built to handle even the toughest infestations. While most pool algicides only stop algae growing in the first place, Algae Eliminator goes further still, actively destroying existing green, black and mustard algae.

Precision-formulated, Algae Eliminator is designed to cure algae problems rather than simply hold them off. Thanks to its dual action properties, it works quickly to bring crystal clear water back to algae-overrun pools, leaving you with peace of mind and a sparkling place to swim.

If your water is heavily infested, these simple, effective steps will give the best results:

1. Keep your filter running continuously to aid in the filtration process.
2. Adjust the pH level of your pool to a range between 7.0 and 7.2 for optimal treatment effectiveness.
3. Thoroughly brush the walls and floor of your pool to dislodge algae and ensure better product penetration.
4. Shock chlorinate your pool water using Shock Granules at a rate of 550g per 10m3 (2.5kg per 9,000 gallons). Alternatively, you can opt for Deep Blue Pro Liquid Shock Chlorine at a recommended dosage of 4 litres per 10m3 (16 litres per 9,000 gallons).
5. After 24 hours, add the calculated volume of Algae Eliminator directly above the water inlets, with a dosage of 2 litres per 40,000 litres (9,000 gallons) for effective algae eradication.
6. For the complete removal of dead algae, leave your filter system operational continuously and consider adding Deep Blue Pro Gel Cube or Deep Blue Pro Granular Floc as additional aids.
7. Remember to remove any solar covers and automatic pool cleaners during the treatment process for optimal product performance.

Algae Eliminator turns algae woes into a pristine pool you can enjoy with confidence. Rather than letting algae take over your oasis, take control with Algae Eliminator now and judge the difference yourself. Look forward to a cleaner, clearer and healthier pool environment with Algae Eliminator.

Manufacturers description:

Most pool algicides work only to prevent algae. Algae Eliminator, on the other hand, is formulated to destroy green, black and mustard algae that is already there. Follow the instructions below and Algae Eliminator will clear an algae infested pool.

• Kills off existing Algae
• Built to cure algae, not just prevent it
• Works through dual action
• Brings clarity back to an algae infested pool

DIRECTIONS FOR USE IN HEAVILYINFESTED WATER

1. Run filter continuously.
2. Adjust pH to between 7.0 and 7.2.
3. Brush walls and floor thoroughly.
4. Shock chlorinate pool water with Shock Granules. Add 550g per 10m3 (2.5kg per 9,000 gallons). Alternatively add Deep Blue Pro Liquid Shock Chlorine as follows: 4 litres per 10m3 (16 litres per 9,000 gallons).
5. Wait 24 hours before adding calculated volume of Algae Eliminator directly above water inlets: 2 litres per 40,000 litres (9,000 gallons).
6. For effective removal of dead Algae leave filter plant running continuously and add Deep Blue Pro Gel Cube, alternatively add Deep Blue Pro Granular Floc.
7. Ensure that solar cover and automatic pool cleaner is removed during the above operation.